Reservoir Tank Covers

Hi Guys! 10 years back, which is on September 2010, I bought pairs of reservoir cover for the brake reservoir tank and power steering reservoir tank. You can read it back here

And today, I bought again the reservoir tank cover since the one that I bought was torn and very bad in shape. At first I was looking for Ralliart covers which is sold in my country but I unable to locate it. Most covers that is sold in my country is small in size and not to my liking. So after few hours of online windows shopping, I managed to find the correct size which I was looking for. Without delay, I clicked on the "Buy Now" button 😝. After few days of waiting then the covers delivered to my doorstep and quickly I covered the naked reservoir tank. One word, satisfied! LoL.

blue is my favorite color actually... haha....

oh yes, change to newer and fancy bolts and washers on my MIVEC cylinder head top cover because.... why not? 😆

to install it is as easy as you wearing socks... lol

voila! my HKS reservoir tank cover and Password JDM dress up bolts and washers

Again, some of you might be thinking what is the function of it right? Well if you asked  me then my humble answer is for the wow effect in the engine bay 😂. By the way, the function is actually to absorb fluid from brake and clutch reservoir that may escape and spill into the engine bay or road under hard driving/braking.

Thank you and see yo guys in the next post.

Tomica Mountain Drive Playset

Hi Guys!

On the previous post, I have shared some of my Tomica diecasts collection which I really love so much. And for this post, I would like to share with you guys where I usually **touge my diecast cars (Including Hot Wheels/Matchbox/RMZ) the safer way..... Hehe.. 

**(Tōge (峠, also spelled touge) (pronounced 'TOE-ge') is a Japanese word literally meaning "pass". It refers to a mountain pass or any of the narrow, winding roads that can be found in and around the mountains of Japan and other geographically similar areas) -wikipedia

Tomica Mountain Drive Playset

do subscribe to my >> YouTube Channel <<

As the time goes by, the track surface will becomes smoothless if compared to the first time you bought it, but don't worry as you can always smooth it back by polishing. You can use below products which you can easily found in the store to polish the track:

1) Clean and soft microfiber cloth

2) "Pledge" enhancing polish - water based (suitable for wood & plastic)

Steps:

Spray the enhancing polisher just little bit to the surface of the track and wipe it with clean and soft microfiber cloth. Make sure to focus more on the edge of the track. After you have wiped the residue, try put the diecast car and see whether the car flows much better anddddd.... If not, repeat steps until you are satisfied :) 

Hope this help :) 

*********Some pictures of me and my little boy who shares the same interest with me 😜*********

he must be thinking on which model should he

 asks his dad to buy next.... hehe..

And if you guys have other tips and tricks on how to maintain the playset, do shares in the comment section below. Thank you so much guys! See you in the next post.