New Year 2023

Happy new year guys! 

Well, since my racecraft carbon fiber hood condition is quite bad, so I decided to install back my stock hood to my satria. Will send the carbon fiber hood for refurbish when I have the budget. By the way, do you have contacts for shop which can provide carbon fiber refurbish service? if yes do share in the comment section.

            look at that CF hood condition 😅

                   same old brand new you?

Been keeping this stock hood in my store for a out 12 years if I remember correctly 😅 So much different in weight if compare to my carbon fiber hood🤣

On the other hand, not much update on the car but I just changed my car aircond compressor and replace the faulty FICD when i sent the car for engine oil change. Now the car feel much better when idling everytime I turn on the air conditioning. What to do, running with aircond is a must in our climate 😝 

Thank you for reading and see you in the next post! 

Mitsubishi Colt 4G92 Mivec 200HP

Hi Guys!

Found this awesome video of Mitsubishi Mirage Cyborg R from the net. Such an awesome build and this kind of modification never fails to amaze me. Apart from clean sporty looks, the engine bay is such candy to the eyes. 

The language in in Thai but no worries you can turn on the cc features for translation (even the translation is not perfect). Hope one day when I have budget, definitely will upgrade my Proton Satria to be as cool as the car.

See you guys in the next post! 

Proton Satria Old Advertisements

Hi Guys!

Not much for today post. When I browsing some videos from Youtube during my lunch hour, I came across with Proton Satria old advertisement. It does bring lot of memories to us Malaysian especially those who loves Proton Satria 😁 

Proton Satria

Proton Satria GTi

Still remember watching this advertisement when I was still young at at that time 😆 By the way, are you guys still keeping your old Satria? If yes.. COOL! 😁 I know it is hard to maintain an old car but the passion and the love of the car makes you keep holding on to what you love😃 

Take care and see you in the next post!

Proton Satria : The Journey Goes On

Hi guys!

Nothing much on today post. Just want to share my Proton Satria picture after few months this car was hibernating in the house garage during Malaysia's 3rd movement control order (MCO). Below picture was taken when I brought the car to car wash nearby to remove all the stubborn dirt/dust and cat paws print on the windscreen 😂

Not much update to the engine/body. Just the same old "Blue Shinkansen" that some of you guys know few years back (except aging carbon fiber hood and body paint🤣)

So much planning on this car but keeps on delaying it, since more focus put on my beloved family 😁 Will share update on this ride and keep on following my blog 😊

Thank you!

Proton Satria 4g93 MIVEC in 2021

Hi guys!

In this post, I just want to wish Happy New Year to all of my beloved blog readers. Thank you so much for supporting me through this blog. Getting feedback from you guys means a lot to me. Its been 12 years since I start blogging. I will keep this blog updated soooo stay tuned guys 😎

My Blue Shinkansen 2021

Need to repair my carbon fiber hood as the clear coat starts to peel off and faded. Collecting money for this project. hehe....

The heart of my Proton Satria: The 4g93 MIVEC. No major upgrade for the past few years, just replacing wear and tear to make the car running fine.

Current Engine Setup:

• Mitsubishi 4g92 MIVEC Cylinder head
• Mitsubishi 4g93 Engine Block upgraded with 82mm high compression piston and race bearing
• Matspeed 306in/304ex race camshaft with Aerospeed Adjustable camshaft pulley 
• MIVEC Blacktop ECU with Greddy Emanage piggyback ECU
• Skunk2 Intake Manifold with Super90 70mm Throttle Body + Mugen Airbox filter setup
• Cusco 4-2-1 Header with 2.3 inch piping follow original route with S-flow type muffler
• AVS 255 LPH fuel pump with Works Engineering adjustable fuel pressure regulator
• NGK R09 Power Cables with NGK BKR6E-11 spark plugs.
• Greddy 3 layer Aluminum radiator with Samco hoses.

Still keep the same engine setup since the engine rebuilt back in 2014. Just replacing my fuel pump from Walbro to AVS since the Walbro fuel pump gave me problem. Other than that, replacing the spark plugs from NGK Iriway to normal one... due to budget. hehe..... Might change to a better one later 👌

By the way, that's all for now. See you guys in the next post! 

Sus.Tec Bonnet Damper for Proton Satria

Hi Guys!

Few years back which I cant recalled when, I have already installed bonnet damper. If I remember correctly, I bought Komo bonnet damper. It was good but until one day, I took it off because it doesn't perform well anymore, maybe due to normal wear and tear. Since that, I have been using stock bonnet stand.

Last week as usual, when I start some online window shopping, I came across with an advertisement regarding bonnet damper. Without any delay, as usual, I clicked on "Buy" button. I bought Sus.Tec (Sustec) bonnet damper since the price is quite affordable and good review from other buyers.

front view of the packaging

back view of the packaging

the bonnet damper

love the color of the damper 😆

The installation is quite straightforward, You just need to unscrew those screw that I circle below. After that, you can start by install the damper on side at a time. Once done, tighten back the screws. Voila~ and the installation is completed! 

simple as ABC

At first, you might feel that your engine hood is quite hard but give it a bit of pressure and you might be able to close the hood. Its normal since the damper has is still new and has been sit for quite sometime in the box.

side view of the damper

more picture of the damper

tadaaaa!

Thank you for reading guys! Please stay healthy and together fight Covid-19 pandemic. See you in the next post 😃

Bosch Fanfare Horn

Hi guys!

Nothing much on today post but I would like to share other accessories that I bought for my ride. I don't know why but my horn suddenly cannot be used anymore so I have to drive the car without horn. At first I thought won't mind driving without car horn but actually horn is quite necessary specially when you need to inform that you have reached home (for example) or when other cars make mistakes such as sudden entry to the junction etc.

I bought Bosch Fanfare horn from online shopping due to good review and the price is reasonable. It comes in two horns (low and high tones) as picture below:

the packaging

what's inside the box

The installation is quite straight forward as my current setup already using two horns. So just plug and play 😆. If you can install it without have to take off your car bumper than you are lucky. If not, you will need to take it out 😅

twin turbo 😆 

The sound is quite loud but won't annoy your neighbors 😆. So it is a good buy for me. Glad that I chose this horn model. Affordably good stuff.

That's all for today post. Thank you for reading and a great day guys! 

Proton Satria Mivec 4 Throttle

Hi Guys!

Nothing much for this post but I would like to share some of the cool video that I found from YouTube. From the video, the Proton Satria has been transplanted with MIVEC engine from Mitsubishi. What makes this build up different from other MIVEC setup is the use of individual throttle bodies on each cylinder. What a setup! Enough with the blabbering lets us go straight to the video 😆

I have been dreaming to use ITBs on my 4g93 MIVEC setup but still contemplated because I know that it is very hard to tune. If the tuner is not 'experienced' enough, the engine will make lesser horsepower output if compared to a normal intake setup. So for now I will stay with my current setup (Skunk2 Intake) and wait until I found the right parts and budget for this kind of setup.

See you in the next post!

Reservoir Tank Covers

Hi Guys! 10 years back, which is on September 2010, I bought pairs of reservoir cover for the brake reservoir tank and power steering reservoir tank. You can read it back here

And today, I bought again the reservoir tank cover since the one that I bought was torn and very bad in shape. At first I was looking for Ralliart covers which is sold in my country but I unable to locate it. Most covers that is sold in my country is small in size and not to my liking. So after few hours of online windows shopping, I managed to find the correct size which I was looking for. Without delay, I clicked on the "Buy Now" button 😝. After few days of waiting then the covers delivered to my doorstep and quickly I covered the naked reservoir tank. One word, satisfied! LoL.

blue is my favorite color actually... haha....

oh yes, change to newer and fancy bolts and washers on my MIVEC cylinder head top cover because.... why not? 😆

to install it is as easy as you wearing socks... lol

voila! my HKS reservoir tank cover and Password JDM dress up bolts and washers

Again, some of you might be thinking what is the function of it right? Well if you asked  me then my humble answer is for the wow effect in the engine bay 😂. By the way, the function is actually to absorb fluid from brake and clutch reservoir that may escape and spill into the engine bay or road under hard driving/braking.

Thank you and see yo guys in the next post.

New Intake Setup

Hi guys!

For the last 2 months, i have been thinking of changing my intake setup.After a bit of research and guidance from my mechanic, i choose to go for Mugen air-box setup which is originally made for Honda's engine.

Haven't dyno the engine so i can't share with you guys any increments (perhaps :p) figure.

So far.... i'm happy with the setup 😁

And yeah, i also relocate my battery at the back in order to give a bit more space in the bay for the intake setup. My engine bay look quite neat after the battery relocation.

Engine Rebuild. Completed.

Hi Guys!

I took my car today from the garage. Finally the project is completed.

By the way, i still remember that last engine rebuild/overhaul was done back in May 2009. During 2009, my project was quite crazy..  using VTEC parts etc. Yeah, I'm quite crazy at that time. Wanna try new things. HEHE.

For 2014, no more crazy project like last time. Using back all 4G93 and MIVEC parts. Bought back 4G93 connecting rods and crankshaft ( because i sold my rods and crank to a person from oversea back in 2010 TT ). Change my VTEC 81mm piston to MIVEC 82mm over-sized high compression piston. Other parts can be seen from my previous post...

My 1.9L MIVEC (1881cc)

By the way, this is my valve cover/rocker cover. Look quite nice with the wrinkle effect right? :p HEHE

spray with Gox7 wrinkle spray.....

A closer view of the texture............

All i can say, i am very happy with the new setup. After breaking in the engine ( using dyno machine to break-in the engine... thanks to the technology :p), My mechanic did dyno tuning to the engine. Seriously i am very happy to see the horsepower gains (secret :p). The response is astonishing!

Voila!!!!

My 2014 Engine Specification:

4G92 MIVEC Cylinder Head (skimmed).

4G93 Engine Block (Bore to fit over-sized piston)

Toto 82mm MIVEC Pistons

ACL Race Bearings

Matspeed Camshaft

Arospeed Camshaft Pulley

NGK Power Cables

NGK Iridium Plugs

Skunk 2 Intake Manifold

Super 90 70mm Throttle Body

Cusco 4-2-1 Header

Works Engineering Adjustable Fuel Regulator

Walbro 255lph Fuel Pump

HKS Aluminium Radiator

Samco Hoses

Thanks for reading guys! Next modification? Well See you in the next post :P

Regards!

Engine Rebuild. Work In Progress: Part 2

Hi guys.

The overhauling project is almost done. Below are some of the pictures that i managed to capture and share with you readers!

When i went to the garage, the engine is already inside the engine bay... as you can see above.

bring me back to life!!! :P 

And yeah. Upgrade my fuel pump to aftermarket fuel pump from Walbro. Why? because it is time to change my stock fuel pump with a better one. Other than that, the Walbro fuel pump has a higher flow rate than my current pump. It is capable of providing additional fuel to the injectors when necessary, preventing fuel under-run.

Walbro 255 lph in-tank fuel pump.....

Since my valve cover looks soooo bad (as you can see from the first two pictures above).. i asked my mechanic to help me to respray back the rocker cover. I really love the wrinkle effect which can be seen in most of Honda Vtec valve cover, so i search on the internet and i managed to get the spray can that i was looking for. 

Gox7 Winkle Blue color + Gox7 Primer/Undercoat. 

Stay tuned for more!!!

Regards!

Timing Belt..... SNAPPED!

Hi Guys! 

Never thought this thing could happened :( 

Painful moment..... 

Towed my car to my panel workshop for inspection. There are several damages. Need to rebuild the engine back.

Dismantling the cylinder head....

Do you know what does it mean? yes... it is time for new engine setup. For this new setup, after discussing with my mechanic, i made up my mind to go for oversize MIVEC piston (82 mm) and using back 4g93 connecting rods. No more VTEC piston and connecting rods this time :P

I am very sure that this setup will increase my horsepower since using oversize high compression piston. We will see how it goes.

Regards!

New Set Of Wheels

Hello Guys!

Just a little bit of update. I am a die hard fan of TE37 wheels.... so i changed my sport wheels from Volk Racing CE28N 15x8jj to Volk Racing TE37 15x8jj :P

in progress...... 

 tadaaaaaaaa! 

camwhoring..... 

close up...... 

my favorite rubbers... Yokohama Parada Spec-2

Since tomorrow all Moslem will celebrating Eidul Fitr, I would like to take this opportunity to wish all Moslem all around the world Happy Eidul Fitr. See you guys in the next post.

Regards. 

HWL Fully Adjustable Suspension With Body Shift.

Hello Guys!

Good day to you. Its been a while right? by the way, i have upgraded my suspension from GAB sport suspension to HWL fully adjustable suspension (Hi/Lo & Soft/Hard + Body Shift).

The packaging..... 

unboxing.... yummyyyyyyy :P 

fully adjustable.....  

installed.....

The spring rate that i choose is 6k on the front and 4k on the back. For me the spring rate is suitable for both hard driving and daily driving. After the installation, i can straight away feel the ride becomes more rigid and the driving feel is sooooooo much better. Other than that, the ride also feel a little bit bumpy since the spring rate is much higher than the stock suspension. 

I think i need to make some adjustment on rear camber ( negative camber) since i set the car lower to the ground (better center gravity which can translate to better handling). I need to do the adjustment because i'm using 8jj wheels (wide). Sometimes the tires will rub the fender during hard corner. 

Conclusion

Pros : better handling, freedom of adjustment to suit your handling characteristic, serviceable, can swap to higher spring rate if you want anytime, cosmetic purposes. 

Cons: a little bit bumpy since the spring rate is higher. 

Regards!

Cusco 'style' 4-2-1 header

Hi guys!

Yesterday, i have changed my header from R3 4-1 header to Cusco style 4-2-1 header. I decided to change the header because my R3 header cracked. I decided to change to 4-2-1 header because i want to try new setup for my mivec. The header also have better ground clearance if compared to my 4-1 header.

the downpipe.... sorry the upper part picture of the header lost.... but i think most of u guys know how the cusco 4-2-1 header look like right? :P 

turn golden in color after few hours of driving . yummy

side view.

After all, I am quite happy with the power delivery especially from low end to mid. Still don't have time to tune it on the dyno machine. Hope can get much better horsepower then last time which i already happy :P 

Sorry.. the figure i need to keep it for myself :) 

Regards! 

April 2013 Engine Setup

Hi guys!

Its been a looooooonnnggg time since last update. By the way, I've just change my small aluminium radiator to big 3 layers full aluminium radiator.

Next i might change to new header because the current 4-1 R3 header got crack inside. Still thinking which header setup should i go for. Whether to stick with 4-1 setup or 4-2-1 Cusco or maybe 4-2-1 Hytech design........ Any recommendation guys?

Regards.

When Offset Is Everything

Hi guys!

I just change to a new set of shoes for my humble little ride. I decided to go for Volk Racing CE28N from Rays Engineering. The wheels spec is 15 X 8jj and the offset is 20. Really love the look of my car exterior now because the wheels make it more aggressive.

Other than that, i decided to take out my R3 Stage 3 Lips. Now i want to maintain 'clean' exterior look. Maybe in the future i might install the lips back. But after all i really love the aggressiveness of the exterior when i use this sport wheels :) 

Regards! 

A Little of Update

Hi guys :)

I would like to wish all my moslem reader, happy fasting in the holy month of Ramadhan. So back to the topic, here are some updates on my ride.

Change to a new lower arm for both sides (sorry i forgot to take pictures) since i spotted bent on my rear lower arm. Other than that, i installed Ultra Racing rear lower arm bar (picture above) to replace the old one. Seriously i can say the Ultra Racing is much more better in giving me better ride handling since the bar is much more thicker than my previous 'no brand' bar.

Other than that, after much consideration, i revert back to standard MIVEC air box after using custom direct cold air intake without any filter in it. Maybe i'm getting older? LOL

By the way, sorry for the lack of update. Thank a million for those who still following this blog. I will update it from time to time.

Regards!

PROTON Production Car & Satria GTi Campionship in AFOS 2003

An old video but i think it is worth to watch.